Fluid Bed Dryer
DESCRIPTION
Fluid Bed Dryer are most suitable for drying granular, crystalline, coarse or similar material in pharmaceuticals, fine chemical, food allied industries.
OPERATION
The wet material is introduced into the dryer, batch of material in product container which is provided with air distributor plate and Dutch mesh. Induced draft is created by the blower and fresh air is sucked into the unit. After filtrate clean air passes through the product container creating turbulence in the product and hence the product moves up & down in the product container. Due to this the heat transfer quick and product is dried fast without appreciable loss of heat. Filter bags prevent particles escaping from dryer.
| Models | FBD10 | FBD30 | FBD60 | FBD120 | FBD200 | FBD300 | FBD400 | FBD500 | FBD600 |
|---|---|---|---|---|---|---|---|---|---|
| Container Gross Volume Lts. | 46 | 71 | 142 | 280 | 475 | 650 | 870 | 1055 | 1350 |
| Max. Batch Capacity (0.5 bd) kg. | 0 to 15 | 20 to 30 | 40 to 60 | 80 to 120 | 160 to | 200 to | 300 to | 400 to | 500 to |
| Blower Motor HP | 3.0 | 7.5 | 10 | 20 | 25 | 30 | 40 | 50 | 50 |
| Air Flow (CFM) ± 10% | 430 | 706 | 1060 | 1880 | 2590 | 3235 | 3825 | 4000 | 4705 |
| Steam Pressure (kg/cm²) | 3.5-4.5 | 3.5-4.5 | 3.5-4.5 | 3.5-4.5 | 3.5-4.5 | 3.5-4.5 | 3.5-4.5 | 3.5-4.5 | 3.5-4.5 |
| Steam Consumption (kg/hr) | 30 | 50 | 80 | 140 | 216 | 250 | 288 | 344 | 384 |
| Electric Heater (kW) | 18 | 20 | 36 | 60 | N.A. | N.A. | N.A. | N.A. | N.A. |
| Compressed Air Pressure (bar) | 05-06 | 05-06 | 05-06 | 05-06 | 05-06 | 05-06 | 05-06 | 05-06 | 05-06 |
| Electrical Supply | 415 V ± 10%, AC, 3 Ø, 50 Hz | 415 V ± 10%, AC, 3 Ø, 50 Hz | 415 V ± 10%, AC, 3 Ø, 50 Hz | 415 V ± 10%, AC, 3 Ø, 50 Hz | 415 V ± 10%, AC, 3 Ø, 50 Hz | 415 V ± 10%, AC, 3 Ø, 50 Hz | 415 V ± 10%, AC, 3 Ø, 50 Hz | 415 V ± 10%, AC, 3 Ø, 50 Hz | 415 V ± 10%, AC, 3 Ø, 50 Hz |
OPERATION:
The wet material is introduced into the dryer, batch of material in product container which is provided with air distributor plate and Dutch mesh. Induced draft is created by the blower and fresh air is sucked into the unit. After filtrate clean air passes through the product container creating turbulence in the product and hence the product moves up & down in the product container. Due to this the heat transfer quickly and product is dried fast without appreciable loss of heat filter bags prevent particles escaping from dryer.
FEATURES
- Sturdy construction
- Low maintenance
- Easy installation and low power consumption
ADVANTAGES
- Short Drying Time
- Automatic & Manual Operation
- Pneumatic fully cGMP model
- Provided Electrical Control Panel
FURTHER DETAILS
- Trolley system provided with the machine is SS-316 constructed.
- Supported by automation and PLC control.
- Provided with expansion chamber that feature the guide support.
WORKING PRINCIPLE
- The dryer suck the atmospheric air via micron filter and balanced fan driver
- Provide clean air passes over electric heater/s, steam
- By the process of fluidization, the hot air passes through the product
- The dryer is provided with dehumidifier support
- The blower speed is controlled through an AC frequency drive that assists in controlling fluidization and avoids the choking of filter bag
- To avoid lump formation in a container and achieve uniform fluidization, the ranking system is provided
M. O. C.:
SS 316/SS 304 OR as per customer requirement.